Top Quality Household rubber glove-S to Tajikistan Manufacturer

FAQ Content

For Auto Body and Paint Supplies visit http://www.CollisionBlast.com/Supplies For FREE access to training at http://CollisionBlast.com DIY Por 15 Part 1 – How To Prep Rust Before Applying POR 15 using Marine Clean and Metal Ready.

For rusted metal, such as the floor board on this mustang, there are two options when prepping for POR 15. The first option, I am going to demonstrate in this video. The second option is to have the metal blasted to bare metal.

MARINE CLEAN is a complex mixture of organic & inorganic chemicals. It is non-toxic, biodegradable, water-based, and has no noxious odors nor chlorinated solvents. It doesn’t contain any petroleum products and has no flash point. Marine Clean repre- sents a revolutionary breakthrough in cleaners, degreasers and dispersants.

Use MARINE-CLEAN for cleaning and degreasing machinery parts, turbine blades, diesel engines, compressors, transformers, bulkheads, deck plates, bilge areas; removal of oily deposits found in closed systems such as air conditioning, boiler tubes, compressor lines, heat exchangers and coils; removal of light distillates, mineral oils, heavy grease, degreasing all metal surfaces, plastics, wood, fiberglass, painted surfaces. Always wear eye protection and rubber gloves when using Marine Clean.

PREP & READY provides the best adhesion for POR-15® on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe PREP & READY to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® or any other paint. PREP & READY is not caustic, corrosive, toxic or flammable

Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision

Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6

Join me on Twitter at http://Twitter.com/DonnieSmith7

Join our Facebook page at http://Facebook.com/CollisionBlast

For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com

Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.

Music
Licenced track: Michael Conn “Dare”
Cuesongs.com

http://www.magnalight.com/p-50562-explosion-proof-blasting-light–led-blasting-gun-light–4-watt–rechargeable.aspx

Buy American Compliant

The Magnalight BLG-LED-4REX Explosion Proof LED Blasting Gun Light has a 4 watt LED that produces 130 lumens of intense LED illumination and is designed for extreme durability in media blasting applications. This powerful LED light is designed to be mounted to any standard blasting gun and is powered by rechargeable batteries so no cords or transformers are necessary. This light will run for 4 hours at full power on a single single charge. A specially designed mounting system and quick change protective shield allows operators to use this unit as a blasting gun mounted light source that will stand up to abusive use.

This LED blasting gun light features a specially designed mounting system which allows the unit to be attached to the end of any standard blasting gun. This mount includes all neccessary mounting hardware and a protective lens cover that can be removed and replaced even when wearing gloves. This protective lens is a simple slide in, slide out configuration that allows operators to pull the lens out and slide a new one in as the lens is worn out by exposure to blasting materials such as coal slag, sand and baking soda. This lens is constructed of tempered glass for durability and is held in place by a spring loaded fastener. A slot in the bottom of the lens holder allows particles to clear when performing lens changes.

Power for this blasting light is provided by included rechargeable batteries which give this unit a runtime of 4 hrs at maximum output. The high intensity LED in this light produces 130 lumens and has a lifetime of 50,000 hours. A rubber push button switch provides easy operation and a highly durable nylon housing provides excellent resistance to damage from impacts and vibrations. This unit is watertight and able to withstand the rigors of aggressive and heavy duty use applications. Compared to typical gun mounted blasting lights, this compact LED unit is light weight, offers freedom from electrical cords, and produces much brighter and intense illumination than comparable incandescent lights.

This explosion proof LED blasting light can be toggled between light modes by holding the switch down for a predetermined amount of time. Simply pressing the switch once activates the light in high mode producing a far reaching 130 lumen light beam. Holding the switch down activates the light in low mode and produces a moderate 50 lumens of useable light that will last for 12 hours. Extreme runtime is produced by holding the switch down for ten seconds to activate the light in dim mode, producing 1.3 lumens of light at 120 candela that will last for up to 480 hours.

Included with this light are 2 charging units with cords. Attach one of the charging cords to gain power, then attach to the light and the light will begin to charge. A 120V wall plug cord (VAC) and 12V vehicle cigarette plug cord (VDC) are both included.

Specifications / Additional Information

Lamp Type: C4 LED
Dimensions: Light Only- 6″ X 2″ X 2″
Watts: 4
LED Life Expectancy: 50,000 hours
Lumens: 130 High – 50 Medium – 1.3 Low
Lighting Configuration: Spot
Mounting: Clamp on Blasting Gun Mount
Lens: Quick Change Tempered Glass
Candela: 15,000 High – 5,700 Med – 120 Low
Burn Time: 4 Hrs High – 13 Hrs Med – 480 Hrs Low
Power: Rechargeable
Charging: 120 VAC Wall Unit- 12 VDC Vehicle Charging Unit

Approvals

Class I, Division I, Groups C, D
Class II, Division I, Groups C,D,F,G
Class I, Division II, Groups A – D
Class III,
T3 temperature rating

Toll Free: 1-800-369-6671
Intl: 1-903-498-3364
www.magnalight.com

#larsonlights