Online Manufacturer for Rubber glove-household-L to Thailand Factories

FAQ Content

Amazon link for tyres up to 265mm http://amzn.to/2hxuPKO
Don’t get Caught out this year get some easy to use and help you get through snow and ice and help you also brake better in snow and ice.
The advantages of these are there light weight and less chance of damaging your alloy wheels with the metal of a chain coming in to contact with your wheel these are made from plastic and nylon only the studs and the pull though holders are metal.
Hi people when you fit these to your car or truck there are a few things you need to do I would have thought would be common sense.
1. Make sure that no metal part of the kit is in contact with the alloy or steel rim the strap should be the only part that is in contact with the wheel so the fixing part of the strap should be on the tyre not touching the rim itself.
2.A good idea in snow regardless if you are fitting these is to lower your tyre pressure just a bit so your tyre has a larger footprint on the road more tyre more grip.
3.You drive as recommend no more than 40KPH I would recommend a max of 30KPH to be on the safe side better slower and get home safe and sound.
4.Only fit these if you have a tyre of the size that these are meant for if you put these on skinny tyres your gonna have problems buy the set to fit narrower tyres.

** MAX SPEED OF 25 MPH AND SHOULD ONLY BE USED IN SNOW OR ICE IF USED ON TARMAC THEY COULD GET DAMAGED FAST ***
You get 6 in the bag with a pair of gloves and also a tool to help you pull the webbing though I went each side of a spoke on the alloy so the tracks would not move about.Very easy to fit you only need them on the drive wheels front wheel drive on the front rear on the rear and 4X4 I will be putting them on the front of my Disco.
Super antiskid nails with higher density & larger size , Dichotomanthes nail surface for better antiskid effect.
Universal model, fits all models with 6.5inch-10.4inch/165mm-265mm tire width.
Zinc alloy fixed buckle,real material made special fasteners with strong abrasion resistance.
Low temperature resistant, 100% pure Dichotomanthes material, resistant to low temperature of minus 50 degrees Celsius.
6 pieces of chain, one tire need to be installed 3 pieces. Applicable to snowfield, uphill,soil sliding environment.
ote:
. 40 km/h speed limit.
. Slamming on the brake, a sharp turn prohibited.
. Suitable for all models with 165mm-265mm tire width !

Kindly Remind:
The anti-skid chain guarantee manufacturing defects only, damages brought by such reasons as speeding, improper installation, expired use, drving on asphalt or concrete pavement rather than icy and snowy pavement not guaranteed. Producer do not undertake any liability for property damage and personal injury caused by anti-skid chain.

Package includes:
. 6 x Anti-slip Chain
. 1 x Tool
. 1 x User Manual

Description:
　 HY630 is liquid rubber(condensation cure rtv, or tin cure silicone) mainly used for silicone plastic molds, with the advantages of good tensile strength, high tear strength, high temperature resistance, excellent chemical resistance, high duplication times, long-term stability, high durability, etc. This moulding rubber is one of the products with the highest use level in the production of craftwork gifts and its shrinkage is even lower than 2‰. RTV mould rubber and silicone rubber are general called two-component room temperature vulcanization silicone with excellent fluidity and good operational flexibility, easy moulding process, and so on. Add curing agent of 2%-3% at the room temperature, the rtv mould rubber is still operational within 30 minutes,and after 2-5 hours, the silicone elastomer(silicone mold) will be obtained with resistance to deformation, extremely high or low temperature, acid and alkali and expansion. The rtv mould rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles. It is also suitable for fabrication of precision molds.

RTV Mould Rubber Applications:
Plastic molds, silicone soft plastic molds,making molds for plastic toys, plastic crafts, plastic gifts, PU products,stationary products, pavement, and so on. It has a quite broad applications due to its favorable viscosity and hardness.

RTV Mould Rubber Standard Datasheet:
Model
Appearance
Viscosity　 (cs)
Hardness (A°)
Tensile Strength (kgf/c㎡)
Tear Strength (kgf/㎝)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
630
White
30000~38000
30±2
≥3.8
≥2.8
≥380
2~3
0.5~1
2~5

Operation Instruction for rtv mould rubber:
　 The product is a kind of white flowing liquid . If the customer wants to make large products and large size molds, the mold should be made of rtv mould rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of rtv mould rubber with low hardness. The amount of the curing agent depends on the actual requirements of the customer.

The proportions and reactions of the curing agent and the silicone are listed in the following:
　　1. Curing agent 1% added, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.
　　2. Curing agent 2% added, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.
　　3. Curing agent 3% added, the silicone can still be operated within 28 – 30 minutes and can be demoulded after 1.5-2 hours.
　　4. Curing agent 4% added, the silicone can still be operated within 10 – 15 minutes and can be demoulded after 1 -1.5 hours.

Any more information abt Silicone rubber, pls feel free to contact Ms. Jojo
Mobile: 0086-15013774669
Fax: 0086-755-89948030
Website: : www.szrl.net
Email:hyxz@szrl.net
Skype: live:siliconerubber
Weichat:8618229852599
WhatsApp:008615013774669