High Quality for 12″ rubber glove with cotton linning-rough finish Wholesale to Hongkong

FAQ Content

Description:
　 HY630 is liquid rubber(condensation cure rtv, or tin cure silicone) mainly used for silicone plastic molds, with the advantages of good tensile strength, high tear strength, high temperature resistance, excellent chemical resistance, high duplication times, long-term stability, high durability, etc. This moulding rubber is one of the products with the highest use level in the production of craftwork gifts and its shrinkage is even lower than 2‰. RTV mould rubber and silicone rubber are general called two-component room temperature vulcanization silicone with excellent fluidity and good operational flexibility, easy moulding process, and so on. Add curing agent of 2%-3% at the room temperature, the rtv mould rubber is still operational within 30 minutes,and after 2-5 hours, the silicone elastomer(silicone mold) will be obtained with resistance to deformation, extremely high or low temperature, acid and alkali and expansion. The rtv mould rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles. It is also suitable for fabrication of precision molds.

RTV Mould Rubber Applications:
Plastic molds, silicone soft plastic molds,making molds for plastic toys, plastic crafts, plastic gifts, PU products,stationary products, pavement, and so on. It has a quite broad applications due to its favorable viscosity and hardness.

RTV Mould Rubber Standard Datasheet:
Model
Appearance
Viscosity　 (cs)
Hardness (A°)
Tensile Strength (kgf/c㎡)
Tear Strength (kgf/㎝)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
630
White
30000~38000
30±2
≥3.8
≥2.8
≥380
2~3
0.5~1
2~5

Operation Instruction for rtv mould rubber:
　 The product is a kind of white flowing liquid . If the customer wants to make large products and large size molds, the mold should be made of rtv mould rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of rtv mould rubber with low hardness. The amount of the curing agent depends on the actual requirements of the customer.

The proportions and reactions of the curing agent and the silicone are listed in the following:
　　1. Curing agent 1% added, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.
　　2. Curing agent 2% added, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.
　　3. Curing agent 3% added, the silicone can still be operated within 28 – 30 minutes and can be demoulded after 1.5-2 hours.
　　4. Curing agent 4% added, the silicone can still be operated within 10 – 15 minutes and can be demoulded after 1 -1.5 hours.

Any more information abt Silicone rubber, pls feel free to contact Ms. Jojo
Mobile: 0086-15013774669
Fax: 0086-755-89948030
Website: : www.szrl.net
Email:hyxz@szrl.net
Skype: live:siliconerubber
Weichat:8618229852599
WhatsApp:008615013774669

Go to http://scopes24.com/B007XQAFH2.html
LaCrosse eighteen” 4xBurly Watertight 800 gram Insulated Looking Boots. Heat, dry, Further – supportive comfort and ease for the hunt. For the initial time at any time, LaCrosse’s Quad Core 4-layer comfort and ease method has been built-in into a searching boot… so you get work boot comfort and ease and assist in a Boot that’s built for the field! With 800 gram Insulation, one hundred% waterproofing, Ankle-Fit personalized comfort and ease and a Realtree APG camo pattern, these are primo all the way. Additional: Rugged all-pure, one hundred% waterproof, hand-crafted rubber higher Quad Core technological know-how delivers 4 levels of cushioning and assist for improved comfort and ease 800

FeaturesWaterproof pull-on boot with scent-absolutely free rubber higher
:
Gusset with adjustable ladder-lock buckle strap