High quality factory 26″ Industrial rubber glove-rough finish Supply to Mongolia

FAQ Content

http://www.magnalight.com/p-50562-explosion-proof-blasting-light–led-blasting-gun-light–4-watt–rechargeable.aspx

Buy American Compliant

The Magnalight BLG-LED-4REX Explosion Proof LED Blasting Gun Light has a 4 watt LED that produces 130 lumens of intense LED illumination and is designed for extreme durability in media blasting applications. This powerful LED light is designed to be mounted to any standard blasting gun and is powered by rechargeable batteries so no cords or transformers are necessary. This light will run for 4 hours at full power on a single single charge. A specially designed mounting system and quick change protective shield allows operators to use this unit as a blasting gun mounted light source that will stand up to abusive use.

This LED blasting gun light features a specially designed mounting system which allows the unit to be attached to the end of any standard blasting gun. This mount includes all neccessary mounting hardware and a protective lens cover that can be removed and replaced even when wearing gloves. This protective lens is a simple slide in, slide out configuration that allows operators to pull the lens out and slide a new one in as the lens is worn out by exposure to blasting materials such as coal slag, sand and baking soda. This lens is constructed of tempered glass for durability and is held in place by a spring loaded fastener. A slot in the bottom of the lens holder allows particles to clear when performing lens changes.

Power for this blasting light is provided by included rechargeable batteries which give this unit a runtime of 4 hrs at maximum output. The high intensity LED in this light produces 130 lumens and has a lifetime of 50,000 hours. A rubber push button switch provides easy operation and a highly durable nylon housing provides excellent resistance to damage from impacts and vibrations. This unit is watertight and able to withstand the rigors of aggressive and heavy duty use applications. Compared to typical gun mounted blasting lights, this compact LED unit is light weight, offers freedom from electrical cords, and produces much brighter and intense illumination than comparable incandescent lights.

This explosion proof LED blasting light can be toggled between light modes by holding the switch down for a predetermined amount of time. Simply pressing the switch once activates the light in high mode producing a far reaching 130 lumen light beam. Holding the switch down activates the light in low mode and produces a moderate 50 lumens of useable light that will last for 12 hours. Extreme runtime is produced by holding the switch down for ten seconds to activate the light in dim mode, producing 1.3 lumens of light at 120 candela that will last for up to 480 hours.

Included with this light are 2 charging units with cords. Attach one of the charging cords to gain power, then attach to the light and the light will begin to charge. A 120V wall plug cord (VAC) and 12V vehicle cigarette plug cord (VDC) are both included.

Specifications / Additional Information

Lamp Type: C4 LED
Dimensions: Light Only- 6″ X 2″ X 2″
Watts: 4
LED Life Expectancy: 50,000 hours
Lumens: 130 High – 50 Medium – 1.3 Low
Lighting Configuration: Spot
Mounting: Clamp on Blasting Gun Mount
Lens: Quick Change Tempered Glass
Candela: 15,000 High – 5,700 Med – 120 Low
Burn Time: 4 Hrs High – 13 Hrs Med – 480 Hrs Low
Power: Rechargeable
Charging: 120 VAC Wall Unit- 12 VDC Vehicle Charging Unit

Approvals

Class I, Division I, Groups C, D
Class II, Division I, Groups C,D,F,G
Class I, Division II, Groups A – D
Class III,
T3 temperature rating

Toll Free: 1-800-369-6671
Intl: 1-903-498-3364
www.magnalight.com

#larsonlights

To pick up a Set of the Finishing and Polishing Mandrels, click on the below link:

http://etsy.me/1UcRSJ1

* For a complete list of the highest quality coin ring-making tools, visit my Shop page at:

http://www.CoinRingUSA.com

There’s a lot of information on how to fold and reduce coins to make coin rings, but almost no information on HOW to actually go about and professionally finish and polish the thinner, non-reeded cut edge of your coin rings…

Now you can speed up the finishing process of coin ring-making and obtain the best most uniform high quality smooth, shiny, and even finish to the NON-REEDED edges of your coin rings by quickly getting rid of those unsightly, uneven, sharp edges with this Finishing AND Polishing Mandrel Set!.

No more having to use nail buffing files, sanding by hand, using steel round files or deburring tools to finish your rough coin ring edges… nothing else performs better in completing this critical aspect of coin ring-making.

This Professional set of 3 different-sized Finishing and Polishing Mandrels are designed to give your coin rings that professional-looking quality finish on the edge that was originally the inner part of the coin that is so hard to achieve and will finish and polish any coin ring from an approximate US size of 5, up to an approximate US size of 14.

The Kit comes with a precision German-made stainless steel shank complete with 3 interchangeable uniquely-designed abrasion resistant mandrel cones in the following sizes:

Small — (fits ring sizes of approx. 5-8),
Medium — (fits ring sizes of approx. 8.5-11),
Large — (fits ring sizes of approx. 11-14).

To change from one size to another, you simply hold the tapered rubber mandrel with one hand and twist the steel shank with the other…. no tools are necessary!

The advantage to using the finishing and polishing mandrels is that as the ring is held on tightly to the tapered mandrel that’s spinning while being attached to your power drill; it acts much like a small lathe, providing a much more uniform finish to the ring than can be achieved with either hand-sanding, using a nail buffing file, a steel round-file, or even a small rotary tool such as a Dremel.

*** TO BEGIN ***

1.) Determine which size Polishing Tapered Mandrel fits your completed coin ring, and slide the coin ring on to it.

2.) Place the Mandrel bit into your power drill and tighten.

3.) Adjust the coin ring until it’s well-balanced with no “wobbling” on the Mandrel with your power drill on, and then expand the Mandrel by tightening the Stainless Steel Phillips head set screw at the top which holds the coin ring securely in place.

4.) Begin on the outer edge of the coin ring with the coarser 100 Grit sandpaper and work your way around to the inner edge of the coin ring; making sure that ONLY the corner tip of the sandpaper is making contact with the unfinished inner, top, and outer edges of your coin ring to prevent damage to the rings’ detail. Take your time with this step; especially when you’re first starting out.

5.) Continue to work the inner, top, and outer edges of the NON-REEDED side using the finer Grits of sandpaper as you go; finishing with “0000” Steel Wool. You can also use the steel wool and LIGHTLY go over the inner and the outer detail of the coin ring before you either polish it with a jeweler’s cloth or after you’ve put a patina (antique-looking) finish on the ring.

6.) The final step is to use a jeweler’s cloth to both buff and finish-polish your coin ring.

Your ring will now have a highly-smoothed, rounded, and polished edge on the NON-REEDED side that is not often seen on coin rings!

Other materials needed: a power drill, 3 different grits of sandpaper (I use 100 Grit, 500 Grit, and 1,000 Grit), some “0000” Steel Wool, and a jeweler’s polishing cloth to complete this process. Those items can be purchased from Amazon.com; at a big box store like Home Depot, or any local hardware store inexpensively.

*** SAFETY FIRST ***
- Always wear safety glasses and work gloves.
- Always use caution when working with any power tools and electricity.
- Keep fingers, long hair, and loose clothing away from any fast moving parts.

Description: “How to Get Smooth Rounded Edges to the Rough Cut Side of Coin Rings!”