High definition wholesale Isolater rubber sleeve Turin Supplier

Short Description:

14″ length (35cm), black, smooth finish, seamless, no cotton lining, 350g/pair, cuff perimeter:61cm, double layer thickness:2.2mm. 40 pairs/case. Net weight: 12.8kg/case, gross weight: 13.8kg/case. It can be suitable for sand blasting machine, dry box, isolater operation for arm protection.


Product Detail

FAQ

Product Tags

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers. High definition wholesale Isolater rubber sleeve Turin Supplier, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!


14″ length (35cm), black, smooth finish, seamless, no cotton lining, 350g/pair, cuff perimeter:61cm, double layer thickness:2.2mm. 40 pairs/case. Net weight: 12.8kg/case, gross weight: 13.8kg/case. It can be suitable for sand blasting machine, dry box, isolater operation for arm protection.

  • Previous:
  • Next:
  • FAQ Content




  • GET THE TEMPLATE at https://armortemplates.com/

    How to make this gauntlet yourself using ordinary tools in your garage!

    VIDEO TRANSCRIPT:
    dark hero gauntlet tutorial
    this is made of 22 gauge stainless steel
    and 20 gauge brass very cool design
    very fun build it’s actually not that hard to
    do this one
    there’s not that many parts
    compared to other ones, so a little easier there you also get that sharp finger look
    without having the issue of not the being able to hold an item so
    grab your hammers and let’s get started
    download the template
    at the link under the video or go
    directly to armor templates dot com
    Here’s the glove I got I think it was thirteen dollars
    at Amazon pretty good deal
    this is just leather I had laying around this
    we’re going to sew to the bottom of the glove
    to extend it
    to attach other pieces later on so we’re gonna sew right here
    this is a leather
    needle but a regular needle will work as well
    here it is sewn on
    now cut the pieces out of the template
    trace them onto metal. I suggest building it in paper
    first though like always
    that way you can make changes before you
    commit to metal
    cut the pieces out here they are
    this is the hand part usually I call
    the knuckleplate
    we’re gonna be bending these ends
    but not straight like this
    at an angle on both sides to match the angle of your hand
    so you can bend this by hand for the most part and
    then using a hammer just
    touch up the corners to bend them a little bit further along
    keep checking against your hand to see if it
    fits
    I’m also gonna be making a crease right here Just keep that in mind as you shape
    I have a little gouge here in this piece
    of metal, or, piece of wood, excuse
    me this is a masonry chisel
    and I’m just gonna place this thing here
    and carefully line this up and hit it
    gives us a nice straight line right here as you can see
    and using a hammer in the vice
    just kinda curving over some these parts
    make them fit my hand a little bit better
    not too bad of a fit
    I’m also going to the trouble to round these
    edges a little bit more you
    me do this in other tutorials it just
    gives it a much finer look
    I did this with all the parts I
    could on this gauntlet some parts a little
    bit difficult but
    you could skip this part but i really
    suggest it it’s not that hard and it really makes
    a big difference
    for some other parts you can use the
    the seamer tool to make a nice crisp edge
    you can find that tool in any home improvement store
    in the gutter and downspouts section
    I’m also rounding this part a little bit
    afterwards to match the curve of my wrist
    and like before I’m doing the edge rolling
    just a little bit to give this piece a
    little bit more just a heftier look
    You can see I’ve got a little line scored here this is to
    use the seamer tool and I’m gonna bend this part over
    you’ve also seen this in other tutorials of mine
    this just gives you a much straighter edge
    and it reinforces it to make it much stronger
    bend the rest of the edge over with a
    hammer on a flat surface, and there you go
    now I’m using a piece exhaust pipe
    and I’m just rounding this part which is
    called the vambrace
    compare the all the parts together and
    make sure that they all fit together properly
    notice that I have
    this edge at the front lined up just
    perfect
    but the back is a little bit long so no big deal we’re just gonna trim that off
    using the same processes as before I’m gonna
    make a nice long straight ridge
    down the vambrace part
    this is a little bit more difficult to get perfect but
    keep on working on it and you’ll do fine
    match the parts up as I did this I noticed the curve is
    fine but this part here needs to be filed down
    just a little bit
    because it was just a bit too
    close in one spot, so
    all of your parts will need to be touched up
    like this as you go because
    every time you bend a part it’s going
    to affect
    the shape interacting with the next shape,
    so keep that in mind. this is the thumb base
    just shaping it against a
    a little piece of pipe here
    this is the thumb tip
    in my little jig which you’ve seen before
    a little extra shaping and then
    put these parts together and see how
    they work. needs a little more work here but you
    get the idea
    here’s one of the fingerplates done in the same exact way. also I’m using
    the masonry chisel to
    make this point a little bit more sharp there
    not really but a little bit…it does make a difference
    here you see me trimming off some of the
    metal that’s in the way
    you’ll have to do this from time to time
    I have a little bit of a sticking problem in this
    so we’ll trim that a little bit more and grind it you
    can also round it like this
    make sure the fingers of floppy like this
    you don’t want it to be sticking at all
    here I’m rounding one of the
    four little pieces that go on top of the knuckles
    and giving it a little ridge as well



    Miss Helene walking in classy outfit wearing red thigh high boots. Wait, there is a pig on the way! 9:05

    Full videos at SeeMeWalking.com

    This is the place for everybody who loves high heels and hot figures in tight outfits walking in their natural environment
    Have you have seen a self confident woman walking down the street in high killer heels with a figure of a goddess ….
    You just want to see more!
    Thats where we can help, our videos are sexy yet fun.
    We adore wearing high and thats why we have dedicated our channel and site for that niche.
    All the video are 100% original found ONLY in our official YouTube channel or our official webpage SeeMeWalking.com
    Videos uploaded any other locations are copyright infringements and illegal posts without permission.
    ALL COPYRIGHT INFRINGEMENTS WILL BE REPORTED
    Copyright © SeeMeWalking 2014
    Please feel free to give us new ideas and fantasies, you are also welcome to comment the videos in our channel.
    Please do not ask us to produce adult or inappropriate content

    Send your message to us:

    INQUIRY NOW
    • [cf7ic]

    Related Products

    INQUIRY NOW
    • [cf7ic]